It pays to have us do the insulating for you...
The reasons are plenty, guaranteed workmanship, guaranteed R value, and peace of mind!
Call us today for a free, no obligation quote.
Building Code News
The Ontario Building Code is changing again. Ontario Regulation 332/12 comes into affect January 1, 2014. Read More
Retrofit Initiatives
The Government of Canada has not choosen to renew the EcoENERGY retrofit program again. If this changes in the near future, we will notify you as soon as possible.
Technical Insulation Information
Product Data Sheets
- ProPink Complete Wall System, Technical Data Sheet
- ProPink Loose Fill Fibreglass, Technical Data Sheet
- Foamsulate "Eco" Spray Foam Insulation, Technical Data Sheet
- Monokote MK-6 Cementitious Fireproofing, Technical Data Sheet
- Monokote Z-3306 Thermal Barrier for Polyurethane Foam, Technical Data Sheet
Canadian Construction Materials Center (CCMC) Reports
- Blow-In-Blanket System (Dry), CCMC Report #13198-R
- ProPink Complete Wall System, CCMC Report #13240-R
- ProPink Loose Fill Fibreglass Attic Insulation, CCMC Listing #12851-L
- Foamsulate "Eco" Spray Foam Insulation, CCMC Listing #13527-L
Material Safety Data Sheets (MSDS)
- Owens Corning ProPink, Loose Fill Fibreglass Insulation
- Monokote MK6, Cementitious Fireproofing for Steel
- Monokote Z3306, Thermal Barrier for Polyurethane Foam
Blow-In-Blanket System: Compliance & Standards
- Conforms to the product requirements of CAN/ULC-S702 and ASTM C764 Type 1 (pneumatic application)
- R values are determined in accordance with CAN/ULC-S702 and ASTM C687
- Flame Spread < 0 in accordance with ULC S102.2 and ASTM E84
- Smoke Developed < 5 in accordance with ULC S102.2 and ASTM E84
- Passes the non-combustibility requirements of CAN4-S114 and ASTM E136 and is considered non-combustible by building codes
- Passes the corrosiveness requirements of ASTM C764 and ASTM C665 (is non corrosive)
- Passes the moisture absorbtion requirements of ASTM C1104 (does not absorb moisture)
- When tested according to ASTM C1338 the insulation did not support mould growth
- No formaldehyde binder added to the insulation
- No chemical binding agents added
Quality, Integrity, Pride
Thermo Seal Insulation Systems has been providing superior service and insulation since 1989.
Blow-In-Blanket System (BIBS)
The Blow-in-Blanket System has provided energy efficiency, savings, and warmth to thousands of homes.
Soya Spray Foam
We install only the best spray foam available. Polarfoam Soya has the highest long term thermal R value and zero ozone depleting substances.
Loose Blown Fibre
The most efficient way to insulate your attic is with loose blown virgin fibreglass and Thermo Seal Insulation Systems.
Quality, Integrity, Pride - Since 1989
(800) 461-5672
