Insulation Technical Info, CCMC Reports & Material Safety Data Sheets
Technical Insulation Information
Canadian Construction Materials Centre (CCMC) Reports
Material Safety Data Sheets (MSDS)
Blown-In Fibreglass Insulation: Compliance & Standards
- Conforms to the product requirements of CAN/ULC-S702 and ASTM C764 Type 1 (pneumatic application)
- R-values are determined in accordance with CAN/ULC-S702 and ASTM C687
- Flame spread < 0 in accordance with ULC S102.2 and ASTM E84
- Smoke developed < 5 in accordance with ULC S102.2 and ASTM E84
- Passes the non-combustibility requirements of CAN4-S114 and ASTM E136 and is considered non-combustible by building codes
- Passes the corrosiveness requirements of ASTM C764 and ASTM C665 (is non corrosive)
- Passes the moisture absorption requirements of ASTM C1104 (does not absorb moisture)
- When tested according to ASTM C1338 the insulation did not support mould growth
- No formaldehyde binder added to the insulation
- No chemical binding agents added